Just realized my primer gun was set way too dry until a painter in Tucson told me to turn the fan down
I was spraying sealer on a quarter panel last week and kept getting that grainy, sandy texture no matter how slow I moved, so I figured it was my mix ratio. A painter I know in Tucson looked at my gun for about ten seconds and told me the fan was cranked too wide, which was splitting up the material before it hit the panel. I dialed the fan down about a quarter turn and bumped the fluid out a hair, and the coat laid down flat the first pass. Now I check the fan setting on a scrap panel before I touch a car. What's your go-to test for dialing in a gun before you spray?