Loading…
8
Finally got a coating to stick on a secondhand liner in Portland
Three years of chasing creosote glaze on that old stainless liner, turns out the guy before me had never scuffed the surface and my 40-degree washdown was leaving a film, so I sanded it with 80 grit and one coat of the ceramic sealer held after 2 test burns, has anyone else run into prep issues on used liners or is it just me?
1 comments
Log in to join the discussion
Log In1 Comment
haydenb3617d ago
Prep issues on used liners are way more common than people admit. Ran into the same thing on a stove pipe I picked up cheap, and scuffing it with 60 grit plus a good wipe down with denatured alcohol made the difference between the coating flaking off and actually bonding. Two test burns holding is a solid sign you got it right.
6